We find Unloading Hoppers in Ports facilities, which are normally located in windy areas and exposed to wind effects. When wind blows, dust and the Raring Corp ADSTM Dry Fog may not stay inside of the hoppers, causing environmental issues. Because of this TRC highly recommend to integrate the Raring Corp's ADSTM Dry Fog and Windfences on these applications. This good practice will reduce the wind speed inside of the hoppers and increase the efficiency of TRC ADSTM Agglomerative Dust Suppression System.
One very interesting integration of a passive and an active technology is what the Raring Corp have created on the Unloading Hoppers at Ports facilities, putting together a windfence and the ADSTM Dry Fog which the Raring Corp can offer a pretty unique way to control the dust at these specific points. We have had successfully use this integration in many applications and in different industries. The most important requirement for TRC ADSTM Agglomerative Dust Supprssion System, to successfully work controlling the dust, is the need of containment. Adding a windfence is a good way to add the containment feature to the Raring Corp ADSTM Dust Control System, maintaining the fog and dust on the controlled boundaries which help give TRC ADSTM Dry fog the retention time needed for doing its job. Specifically, in ports we recommend our clients to consider both the Raring Corp ADSTM Agglomerative Dust Control System and windfences on the unloading hoppers, which we have had implemented in several ports in different parts of the world, giving a successful solution for controlling the dust in a challenging and always difficult application. The hoppers are always exposed to wind gusts from different directions and the operation limits the amount of windfence to be installed, nevertheless the integration of these two technologies seems to be a good fit to our clients.
Tecnologies TRC ADSTM Dry Fog, Windfence, Automation, Position Sensor, Compressor, Air Water Filtration Skid, Pump Skids